 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| MOTOROLA SEMICONDUCTOR TECHNICAL DATA JK Flip Flop The MC10EL/100EL35 is a high speed JK flip-flop. The J/K data enters the master portion of the flip-flop when the clock is LOW and is transferred to the slave, and thus the outputs, upon a positive transition of the clock. The reset pin is asynchronous and is activated with a logic HIGH. MC10EL35 MC100EL35 * * * * * 525ps Propagation Delay 2.2GHz Toggle Frequency High Bandwidth Output Transitions 75k Internal Input Pulldown Resistors >1000V ESD Protection 8 1 LOGIC DIAGRAM AND PINOUT ASSIGNMENT D SUFFIX PLASTIC SOIC PACKAGE CASE 751-05 J 1 J 8 VCC K 2 K 7 Q CLK 3 R 6 Q J TRUTH TABLE K L H L H X R L L L L H CLK Z Z Z Z X Qn+1 Qn L H Qn L R 4 5 VEE L L H H X Z = LOW to HIGH Transition 12/93 (c) Motorola, Inc. 1996 3-1 REV 2 MC10EL35 MC100EL35 DC CHARACTERISTICS (VEE = VEE(min) to VEE(max); VCC = GND) -40C Symbol IEE VEE IIH Characteristic Power Supply Current Power Supply Voltage 10EL 100EL 10EL 100EL Min Typ 27 27 -5.2 -4.5 150 Max 32 32 -4.75 -4.20 Min 0C Typ 27 27 -5.2 -4.5 Max 32 32 -5.5 -5.5 150 -4.75 -4.20 Min 25C Typ 27 27 -5.2 -4.5 Max 32 32 -5.5 -5.5 150 -4.75 -4.20 Min 85C Typ 27 32 -5.2 -4.5 Max 32 37 -5.5 -5.5 150 Unit mA V A Input HIGH Current AC CHARACTERISTICS (VEE = VEE(min) to VEE(max); VCC = GND) -40C Symbol fMAX tPLH tPHL tS tH tRR tPW tr tf Characteristic Maximum Toggle Frequency Propagation Delay to Output Setup Time Hold Time Reset Recovery Minimum Pulse Width CLK, Reset Output Rise/Fall Times Q (20% - 80%) CLK MR J, K J, K Min 1.4 290 225 150 250 400 400 100 225 350 Typ 2.0 515 450 0 100 200 740 675 Max Min 1.8 340 275 150 250 400 400 100 225 350 0C Typ 2.2 515 450 0 100 200 690 625 Max Min 1.8 350 275 150 250 400 400 100 225 350 25C Typ 2.2 525 450 0 100 200 700 625 Max Min 1.8 395 350 150 250 400 400 100 225 350 85C Typ 2.2 570 525 0 100 200 745 700 Max Unit GHz ps ps ps ps ps ps MOTOROLA 3-2 ECLinPS and ECLinPS Lite DL140 -- Rev 3 MC10EL35 MC100EL35 OUTLINE DIMENSIONS D SUFFIX PLASTIC SOIC PACKAGE CASE 751-05 ISSUE P -A- B M 8 5 X 45 _ J 1 4 4X -B- M_ G F NOTES: 1. DIMENSIONS A AND B ARE DATUMS AND T IS A DATUM SURFACE. 2. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 3. DIMENSIONS ARE IN MILLIMETER. 4. DIMENSION A AND B DO NOT INCLUDE MOLD PROTRUSION. 5. MAXIMUM MOLD PROTRUSION 0.15 PER SIDE. 6. DIMENSION D DOES NOT INCLUDE MOLD PROTRUSION. ALLOWABLE DAMBAR PROTRUSION SHALL BE 0.127 TOTAL IN EXCESS OF THE D DIMENSION AT MAXIMUM MATERIAL CONDITION. DIM A B C D F G J K M P R MILLIMETERS MIN MAX 4.80 5.00 3.80 4.00 1.35 1.75 0.35 0.49 0.40 1.25 1.27 BSC 0.18 0.25 0.10 0.25 0_ 7_ 5.80 6.20 0.25 0.50 P 0.25 (0.010) M -T- 8X C SEATING PLANE D 0.25 (0.010) M K TB S A S Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. "Typical" parameters which may be provided in Motorola data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. Motorola does not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of the part. Motorola and are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer. How to reach us: USA/EUROPE/Locations Not Listed: Motorola Literature Distribution; P.O. Box 20912; Phoenix, Arizona 85036. 1-800-441-2447 or 602-303-5454 MFAX: RMFAX0@email.sps.mot.com - TOUCHTONE 602-244-6609 INTERNET: http://Design-NET.com R JAPAN: Nippon Motorola Ltd.; Tatsumi-SPD-JLDC, 6F Seibu-Butsuryu-Center, 3-14-2 Tatsumi Koto-Ku, Tokyo 135, Japan. 03-81-3521-8315 ASIA/PACIFIC: Motorola Semiconductors H.K. Ltd.; 8B Tai Ping Industrial Park, 51 Ting Kok Road, Tai Po, N.T., Hong Kong. 852-26629298 ECLinPS and ECLinPS Lite DL140 -- Rev 3 3-3 *MC10EL35/D* MC10EL35/D MOTOROLA |
Price & Availability of MC100EL35
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |